Skip to content
Teklif Atölyesi
Try free

UV print cost calculator

Pick the part size, quantity, number of sides and print layers to see the cost per part with sheet material and cutting, and the suggested price at your target margin. The figures come from a sample catalog; replace them with your own prices.

Calculated in your browser; the numbers you enter are never sent anywhere.

Job
mm
mm
pcs
Printed sides
Print layers and cost per m²
$/ m²
$/ m²
$/ m²
Sheet material
$
Sheet size: 1,220 × 2,440 mm
Laser cutting
$/ m
Pricing
%
%
%
Suggested unit price
$1.10
Suggested total
$110.00
Margin
40%
Cost per part
$0.66
Total cost
$65.98
How the suggested price breaks down$110.00
Line itemAmountShare
Material and waste$22.8320.8%
Printing and cutting$36.0832.8%
Overhead share$7.076.4%
Profit$44.0240%
Cost breakdown
Sheet material$21.74
Waste$1.09
UV print (CMYK)(setup included)$14.55
White ink layer$6.83
Laser cutting$14.70
Overhead share$7.07
  • 0.42 sheets, 253 parts per sheet
  • Print area 1.05 m²
  • Cut length 42 m

Default figures are sample prices from the UV/laser industry pack (exchange rate: CBRT 09/25/2026).

How is it calculated?

Material: parts are nested on the sheet, the share of the sheet used (including the waste allowance) is found, and that share of the sheet price goes into the cost. In the app you can also choose to bill whole sheets.

Printing: each layer (CMYK, white, varnish) is calculated per m² from part area × quantity produced × number of sides. CMYK carries a per-job setup charge.

Cutting: the part's perimeter × quantity produced, in meters; small jobs trigger the laser's minimum charge.

An overhead share is added to the total direct cost; the suggested price comes from your target margin, and the unit price is rounded up so the margin never drops.

Other tools